Other topics
Track in indoor spaces forms the basis for variable, flexible lighting that adapts to the changing designs and uses of the room. ERCO offers three track systems: Minirail 48V track for low voltage, ERCO track for mains voltage and the Hi-trac system with indirect illumination. Singlets are available for individual luminaires. These are available as a 48V version and for mains voltage as well as for flush and surface mounting.
You're aiming for lighting design that focuses on flexibility? You'd like to position luminaires independently of the fixed ceiling outlets? Our track allows you to mount spotlights, downlights and wallwashers in the track without tools and move them easily. Free up the alignment of your lighting from rigid mounting points and design freely. ERCO track can be mounted almost anywhere: on ceilings, vertically on walls and even in furniture – flush-mounted, surface-mounted or suspended. Don't be limited. Control your luminaires in the ERCO track wirelessly, e.g. with Casambi Bluetooth, or wired, for example with DALI.
With a width of only 22mm, Minirail 48V track forms the infrastructure for miniaturised low voltage spotlights.
Installation: recessed, surface-mounted, suspended
Profile dimensions (WxH): 22 x 16mm
Control: wireless, wired, interfaces for all control types
To the product
ERCO track for 220-240V mains voltage is the infrastructure for spotlights, downlights and wallwashers that has been tried and tested for years.
Installation: recessed, surface-mounted, suspended
Profile dimensions (WxH): 33.5 x 34mm
Control: wireless, wired, interfaces for all control types
To the product
Hi-trac is a 72mm high profile, optionally with indirect lighting, for suspended mounting. The system enables more weight in the track and wide pendant distances. The ERCO track is located within the Hi-trac profile.
Installation: suspended
Profile dimensions (WxH): 38 x 72mm
Control: wireless, wired, interfaces for all control types
To the product
Track can be easily mounted to ceilings and walls as a surface-mounted variant. The low installed height of only 16mm with Minirail 48V and 34mm with standard track ensures a calm and tidy ceiling appearance.
Track for 48V as well as for mains voltage can be elegantly recessed into the ceiling. A plaster trim profile is available as an accessory for flush installation. Flanged track, i.e. special track with side flanges, is ideal for installation in suspended ceiling panels.
Track can be suspended from the ceiling with use of accessories. The wire rope suspension is also ideal for suspending track from sloping ceilings. Mounting on a pendant tube allows the track to be loaded with up to 20kg of weight and the pendant tube prevents the track from tilting if loaded on one side.
If your lighting design includes one or more fixed mounting points, then we recommend using the appropriate singlet for low voltage and mains voltage as a recessed or surface-mounted variant. The ERCO singlet allows you to mount spotlights with a 3-circuit adapter or DALI adapter in a particularly elegant way.
As a rule of thumb for a suitable distance to the wall in museums, you can assume around 1/3 of the room height. This is the ideal method for illuminating paintings on walls without casting strong shadows
The miniaturised Minirail 48V track is suitable for small exhibits or display cases. ERCO track with mains voltage is ideal for almost all lighting tasks.
Use track for more than just the power supply of luminaires. You can suspend pictures, signage and objects using separately available hooks. Safety sockets as accessories enable you to supply power to video projectors, for example.
Track downlights illuminate office workplaces in compliance with standards and can be positioned freely in the track. If your office layout changes, simply reposition the luminaires in the track
Position the track approximately centred on the longitudinal axis of the desks. This gives you a good start for positioning downlights flexibly in the track above the office workstations.
Suspended Hi-trac track allows you to additionally illuminate the ceiling and thus brighten up the room with indirect lighting. This creates a high impression of the room.
Track from ERCO has been used around the globe for decades. An important plus: new spotlights mechanically fit into existing systems and luminaires put in operation years ago can be used in new systems. ERCO also offers adapters as OEM components for luminaires from different manufacturers.
With widely spaced suspension points, Hi-trac represents a statically high load-bearing infrastructure – also perfect for indirectly illuminating ceilings and accommodating cables in the upper section of the profile.
In projects with ERCO track and Hi-trac, you can integrate emergency lighting into the track infrastructure. Contact your local ERCO consultant – he'd be glad to help with the specification of the system.
Use your ERCO track infrastructure entirely according to your needs. Accessories such as display hooks allow you to suspend information boards from the track, socket outlets can be used to operate AV equipment and OEM adapters for pendant luminaires enable you to install decorative luminaires.
Design your track system without restrictions: corner, X, T and flexible connectors enable diverse geometries. Suitable accessories are always specified on the data sheet of the appropriate track
You'd like to match your track to your corporate design? With our 'ERCO individual' service we offer you extensive options for individualising your track – e.g. coatings in your desired colour.
ERCO tracks are not only produced in an environmentally friendly way using 100% green electricity, but we also place high demands on sustainability when sourcing materials. We procure our aluminium profiles from suppliers whose raw material is produced through energy-efficient manufacturing processes, generating a maximum of 4.0 kg of CO₂ equivalent per kg of aluminium - 75% less than the global average.
Small spotlights integrate perfectly into the miniaturised Minirail 48V track.
ERCO track as a discreet recessed version creates an elegant ceiling appearance.
Illuminate exhibitions flexibly: ERCO track enables quick repositioning of the luminaires.
Create a greater impression of space with indirect lighting. Available in diverse light colours: Hi-trac track
ERCO track with wire suspension is ideal for difficult ceiling situations.
Stiehl Over Gehrmann
Shop, Sydney
The Twist Gallery - Kistefos Museum
Leica Store, Munich
Duomo Milano
Here you can find initial help. If these answers are not sufficient, simply contact us using the contact form below:
ERCO manufactures track to order. In this way you always receive track with state of the art technology. Our lighting consultants will clarify all details with you concerning the ordering process. You can find your regional contact partner at: Contact
Many ERCO standard products are ready for shipping within 48 hours. Depending on the scope of the project, the quantity and the geographical location of the recipient, the delivery times with shipping are usually only up to two weeks. Delivery times may vary in individual cases, but we will endeavour to meet your desired delivery date. For more information on our delivery times, log in to your
ERCO offers a 5-year voluntary manufacturer's warranty on its products. The currently valid warranty conditions are available on request via the e-mail address: guarantee@erco.com
Do you need an offer for a specific planning task? Simply request the prices and availability of your selected articles online via myERCO. To do so, log in to your
We would be pleased to check your individual modification wishes. Please contact your ERCO lighting consultant. Exciting sample projects that we have implemented with special solutions can be found at: ERCO individual
ERCO track was primarily designed for operating ERCO spotlights. But with OEM component adapters, you can also equip luminaires from other manufacturers to operate in ERCO track. This makes ERCO track an open system. Simply contact us: Contact
Yes. The ERCO Minirail 48V track is the miniaturised track for 48V luminaires. Discover more about Minirail 48V track here.
Yes, ERCO track can easily be shortened on site using a mitre saw. The conductor paths are not damaged in the process.
Yes, ERCO track can be installed flush in the ceiling or wall. We offer a corresponding plaster trim profile as an accessory for this purpose.
Yes. We offer special decorative hooks as accessories which you can fit into ERCO track (220-240V). You can attach objects with weights up to 10kg to these.
Yes. We offer sockets as accessories that you can operate in ERCO track (220-240V).
